iCarsoft i930 Diagnostic Scan Fault Code Reader Tool Land Rover TF930
This product is currently sold out.
The iCarsoft TF930 is a professional vehicle fault diagnostic tool developed by iCarsoft Technology Inc.
Specifically pre-programmed for Land Rover and Jaguar vehicles. It supports full system diagnosis and is a powerful DIY tool enabling owners and technicians to accurately diagnose complex problems.
Test modes include: CANBUS, ISO9141, KWP2000, and J1850.
1 Fast full colour screen
2 USB 2.0 high speed upgrades
3 Support of multi-lanGauge
4 Read and clear Diagnostic Trouble Codes
5 Read live data stream
6 Silicone keypad
7 Full System Diagnosis
8 Pre-programmed for Land Rover and Jaguar
Included in Kit:
USB 2.0 cable
PRE-PROGRAMMED FOR LAND ROVER AND JAGUAR VEHICLES:
Range Rover (1999-2012)
Range Rover Sport (2005-2013)
I/M Readiness - I/M Readiness indicates
whether or not the various emissionsrelated
systems on the vehicle are
operating properly and are ready for
Inspection and Maintenance testing.
Freeze frame - When an emission-related
fault occurs, certain vehicle conditions
are recorded by the on-board computer.
This information is referred to as freeze
frame data. Freeze data is a snapshot of
the operating conditions at the time of an
O2 Sensor test - This option allows
retrieval and viewing of O2 sensor test
results for most recently performed tests
from the vehicle’s on-board computer.
On-Board monitoring - This function can
be utilized to read the results of on-board
diagnostic monitoring tests for specific
Evap system test - The EVAP test
function lets you initiate a leak test for the
vehicle’s EVAP system. Before using the
system test function, refer to the vehicle’s
service repair manual to determine the
procedures necessary to stop the test.
Vehicle information - The option displays
the vehicle identification number (VIN),
the calibration verification number (CVN),
and other information of the test vehicle.
Retrieve generic (P0, P2, P3, and U0),
manufacturer specific (P1, P3, and U1)
codes and pending codes.
RLCM /Air Suspension
Display: 2.8” colour screen, 320 x 240
pixels display with contrast adjustment
Operation temperature: 0ºC - 50ºC
Storage temperature: -20ºC - 70ºC
Power: 9V - 18V
Operating current: 100mA@12V (typical)
Power consumption: 1.2W (typical)
Dimension: 121mm x 86mm x 26mm
(L x W x H)